630 Frame stranding machine support wire manufacturing type of
machinery
630 Frame stranding machine
Technical Parameters:
| Model(Rigid Strand Machine) | 630 |
| Diameter of single wire (mm) | Copper | Φ1.5-5 |
| Aluminum | Φ1.5-5 |
| Maxinum stranded conductorn OD. (mm) | Φ35-55 |
Stranding Pitch (mm) | 6 Bobbin Stranding Cage | 51-896 |
| 12 Bobbin Stranding Cage | 51-896 |
| 18 Bobbin Stranding Cage | 63-1056 |
| 24 Bobbin Stranding Cage | 71-1246 |
| 30 Bobbin Stranding Cage | 87-1553 |
| Capstan | Capstan Wheel Diameter(mm) | 2000 |
| Maximum Haul-off Force(T) | 30 |
| Bobbin Size | 630*475*127 |
| Center Payoff Bobbin | 1600*800*80 |
| Take-up Bobbin | 2500*1500*125 |
| Maxinum Haul-off Linear Speed (m/min) | 69 |
| Center Height (mm) | 1100 |
Application:
The Rigid Stranding Machine is used for twisting and compacting the
round or sector conductors, as well as pre-spiraling the split
conductors.
Features of frame twisting machine:
1. It can achieve fast and automatic replacement of wire reels,
with a replacement time of only about ten minutes, greatly reducing
auxiliary time and manual investment, and improving production
efficiency
2. Able to achieve unmanned operation and information management in
the process from wire drawing machine to frame twisting machine,
and practice intelligent manufacturing for your company
3. Significantly reduce the occupation of workspace by wire reels,
save space, ensure neat and orderly wire reels, and improve the
working environment
Product Description:
The 630 frame stranding machine is a type of machinery used in the
cable and wire manufacturing industry. It is designed to strand
multiple wires or cables around a central core, typically in a
helical pattern, to create a stronger and more durable product.
Here's a general product description for a 630 frame stranding
machine:
Capacity: The "630" in the machine's name typically refers to its
maximum frame size or diameter. It indicates that the machine is
capable of handling wires or cables up to a certain diameter, such
as 630mm.
Frame Design: The frame stranding machine is designed with a
central core or frame around which the wires or cables are
stranded. The frame can be stationary or rotating, depending on the
specific model and manufacturer. The wires or cables are typically
wound in a helical pattern around the frame.
Stranding Speed: The stranding speed of the machine can vary
depending on the specific model and manufacturer. It typically
ranges from a few rotations per minute (RPM) to several hundred
RPM. The exact speed will depend on the requirements of the wire or
cable being produced.
Number of Bays: The machine may have multiple bays, each capable of
holding a separate wire or cable. The number of bays can vary, with
common configurations including 6, 12, 18, or more bays. The
specific number of bays on the 630 frame stranding machine will
depend on the manufacturer and model.
Control System: The machine is equipped with a control system that
allows operators to adjust and monitor various parameters during
the stranding process. This control system may include features for
setting and controlling stranding speed, tension, direction of
rotation, and other parameters.
Safety Features: The stranding machine is designed with safety
features to protect operators and prevent accidents. These may
include emergency stop buttons, safety guards, and sensors to
detect abnormalities or malfunctions. The specific safety features
can vary depending on the manufacturer and model.
Power Requirements: The machine typically requires a three-phase
electrical power supply at a specific voltage and frequency. The
exact power requirements may vary depending on the machine's
specifications and the region in which it is used.
It's important to note that the specific features and
specifications of a 630 frame stranding machine can vary depending
on the manufacturer and model. For more detailed information, it is
recommended to consult the manufacturer's documentation or reach
out to a supplier specializing in wire and cable machinery.
