Low Noise Copper Wire Double Twist Stranding Machine Make Bunching
Wire
Technical Specification
| Model | YL-1600 |
| Dia. Of Stranded product (mm) | Max.30 |
| Stranding Section Area mm2 | 16-95 |
| Dia. Of inlet conductor (mm) | 1.2-3.6 |
| Dia. Of inlet core wire (mm) | 1.0-10.0 |
| Line Speed (m/min) | Max.150 |
| Strand Pitch (mm) | 60-400 |
| Rotation Speed (rpm) | Max.500 |
Application:
Suitable for bunch-twisting copper conductors, aluminum alloy
conductors, etc., and for twisting cable core wires.
Features:
- The machine is controlled by PLC with a human-machine interface.
Digital control technology and PLC programming ensure the
reliability of the entire control system. The strand pitch can be
flexibly set using the touch screen.
- It adopts a bow with carbon fiber material, which has high strength
and is lightweight.
- The bow, traction, and take-up systems all use independent motors.
- Very high efficiency. The production efficiency of the double-twist
buncher is about 3 times higher than that of the rigid strander.
Product Description:
The "Cantilever Double Twist Stranding Machine" is a specialized
piece of equipment used in the wire manufacturing industry. It is
designed to strand or twist multiple core wires together to create
a cable. The "Cantilever" design refers to the machine's structure,
which typically features a fixed base with an extended arm or beam
that holds the rotating components.
This particular machine is specifically used for stranding core
wires that are coated with materials such as PE (Polyethylene) or
PVC (Polyvinyl Chloride). The core wires are the central conductors
of the cable, and the coating provides insulation and protection.
PE and PVC are commonly used coatings in the wire and cable
industry due to their electrical insulation properties and
resistance to environmental factors.
The Double Twist stranding mechanism means that the machine twists
the core wires in two directions simultaneously. This double twist
action helps ensure uniformity and stability in the resulting
cable. The machine's design allows for efficient and precise
twisting of the core wires, ensuring consistent quality in the
manufactured cables.
When using the Cantilever Double Twist Stranding Machine for PE PVC
coated core wires, the core wires are fed into the machine's
rotating components. The machine then twists the wires together in
a controlled manner, ensuring proper alignment and tension. The
resulting cable has multiple core wires that are securely twisted
and encapsulated by the PE or PVC coating.
The cables produced by this machine find applications in various
industries, such as telecommunications, power distribution, and
construction. The PE or PVC coating provides electrical insulation,
mechanical protection, and resistance to moisture and chemicals,
making the cables suitable for both indoor and outdoor
installations.
It's important to note that the specifications and capabilities of
the Cantilever Double Twist Stranding Machine can vary depending on
the specific manufacturer and model. Different machines may have
varying capacities, speed ranges, and additional features to
accommodate different wire sizes and production requirements.
Performance characteristics:
Cantilever single twist machine with cantilever structure and
adopts PLC program + frequency conversion speed control + pneumatic
control, to ensure the uniform tension of the cable; in order to
ensure the stability of the geometric structure after twisting, a
single twist structure is adopted, and a large-diameter steering
guide wheel is designed to minimize bending and low loss; The
movement of the cantilever twist and wire reel take up, and the
traverse movement of the wire reel, through the double control of
the mechanical linkage and the electrical appliance, ensure that
the unit has excellent synchronization from the four states of
startup, normal operation, slow stop, and emergency stop. Stable
characteristics; stable performance of the twist pitch. Simple
operation, to ensure excellent product performance.
φ1000mm cantilever single Twist Machine:
Equipment composition:
(1) Eye mold and meter frame--------------------------1PC (Standard
configuration)
(2) HD-1000 Speed arm type single-twist stranding
machie----------------------1PC (Standard configuration)
| Take-up plate diameter | Φ1000mm x750mm xΦ80mm |
Application wire diameter(mm) | Φ1.0mm-6.0mm |
| Max. diameter after twisting(mm) | Φ25 |
| Pitch(mm) | 30mm-200mm |
| Braking(rpm) | 600rpm/min (Constant speed 500PRM/min) |
| Main motor power | 20HP+ Frequency converter |
| Take-up motor power | 5.5HP+ Differential mechanism |
| Traverse unit motor power | 1HP Gear motor |
| Wire disc lifting and descending device | Electrohydraulic |
| Brake | Pneumatic disc brake |
| Stranding direction | S,Z direction optional |
| Shape size | (L×W×H)432×209×214cm |
| Weight | 6500KG |
(3) PLC computer control box -------------------------1PC (Standard
configuration)
PLC:SIEMENS
